TOWA APN10-30 Handheld Label Applicator | NEOTECH® UAE

Manual handheld label applicator for small rectangular roll labels from 20–30 mm wide and 10–60 mm long, with automatic mechanical label sensing and no external power required.

Brand: TOWA
Model: APN10-30
Product Type: Manual Handheld Label Applicator
Country of Manufacture: Japan

URL Handle:

Meta Title:
TOWA APN10-30 Label Applicator | NEOTECH® UAE

Meta Description:
Explore TOWA APN10-30 manual label applicator for small rectangular labels, 20–30mm wide and 10–60mm long, with no power required.

TOWA APN10-30 Label Applicator in UAE

The TOWA APN10-30 is a manual handheld label applicator designed specifically for small rectangular labels.

TOWA positions the APN10-30 as the premium small-label model in its AP Series. It supports labels approximately 20–30 mm wide and 10–60 mm long, with a recommended gap of 2 mm, maximum release-liner width of 34 mm, maximum roll outside diameter of 100 mm, and an approximate tool weight of 292 g.

The main reason to choose APN10-30 instead of APN-30 is the minimum label length: APN10-30 starts at 10 mm, while standard APN-30 begins at 18 mm.

Overview

Small labels can be difficult to peel and apply repeatedly by hand.

TOWA designed the APN10-30 specifically to improve handling of shorter labels while retaining the simple mechanical operating concept of the APN Series. TOWA describes it as a high-performance tool for small labels.

A typical workflow is:

Pre-Printed Small Label Roll

↓

Load Roll into TOWA APN10-30

↓

Squeeze Handle

↓

Applicator Advances Label

↓

Apply Label to Product / Package

No electricity, batteries, software or compressed air are required.

Key Features

• Designed specifically for small rectangular labels
• Label width: 20–30 mm
• Label length: 10–60 mm
• Recommended label gap: 2 mm
• Maximum liner width: 34 mm
• Maximum roll outside diameter: 100 mm
• Approximate weight: 292 g
• Automatic mechanical label sensing
• No external power required
• No batteries required
• Portable handheld design
• Suitable for pre-printed roll labels
• Best suited to square and rectangular labels
• Made in Japan

Technical Specifications

Manufacturer: TOWA

Model: APN10-30

Product Type: Manual Handheld Label Applicator

Label Shape: Square / Rectangular

Label Width: 20–30 mm

Label Length / Stroke: 10–60 mm

Recommended Label Gap: 2 mm

Maximum Release-Liner Width: 34 mm

Maximum Roll Outside Diameter: 100 mm

Approximate Weight: 292 g

Recommended Label Thickness: 50 μm or greater

Recommended Core Diameter: 25 mm or greater

Preferred Core Size: Approximately 38–51 mm / 1.5–2 inches

Recommended Winding: Inner wound

Recommended Release Liner: Glassine paper

Power Requirement: None

Country of Manufacture: Japan

TOWA recommends paper labels with glassine release liner and notes that film, synthetic and other specialty materials may require advance compatibility confirmation.

Designed for Small Labels

The APN10-30 is different from the standard APN-30 because it can handle much shorter labels.

APN10-30

• Width: 20–30 mm
• Length: 10–60 mm

APN-30

• Width: 20–30 mm
• Length: 18–60 mm

This means APN10-30 is the better choice where the label length falls below 18 mm.

Small Label Applications

Potential applications include:

• Small barcode labels
• Product identification labels
• Small price labels
• Quality-control labels
• Inspection stickers
• Component labels
• Serial-number labels
• Small packaging labels
• Retail stickers
• Manufacturing labels

The applicator does not print the label. A separate printer is required if the label content must be generated first.

Label Width: 20–30 mm

TOWA specifies:

Minimum Width: 20 mm

Maximum Width: 30 mm

The total liner width must remain within approximately:

34 mm

A 30 mm label on a liner wider than 34 mm may not be suitable.

Label Length: 10–60 mm

The APN10-30 supports labels from approximately:

10 mm to 60 mm long

This is the product's main distinguishing feature.

TOWA's current catalogue specifically positions APN10-30 for small labels and confirms support for label sizes from approximately 10 × 30 mm to 60 × 30 mm.

Recommended Gap: 2 mm

TOWA specifies a recommended inter-label gap of:

2 mm

For unusual gaps, compatibility should be discussed or tested.

Maximum Roll Diameter

The standard maximum outside diameter is:

100 mm

This must be checked together with:

• Core size
• Winding
• Liner width
• Label material
• Label thickness

Core Size

TOWA recommends:

25 mm minimum core diameter

with approximately:

38–51 mm / 1.5–2 inches

preferred for normal use.

Label Material

TOWA recommends:

Paper labels

with

Glassine release liner

for normal operation.

Special materials such as:

• Synthetic paper
• Film
• Specialty facestocks

may not feed reliably and should be tested first.

Label Thickness

TOWA specifies labels should generally be:

50 μm or thicker

Very thin labels may not dispense correctly.

Rectangular Labels

The APN Series is intended primarily for:

• Square labels
• Rectangular labels

If the customer needs:

• Round labels
• Oval labels
• Irregular labels

the TOWA APF Series should be considered instead.

Barcode Label Applications

APN10-30 may be useful for small barcode labels where:

• The width is between 20 and 30 mm
• The length is between 10 and 60 mm
• The liner and gap meet the specification

Potential uses include:

• Small SKU labels
• Electronics labels
• Component labels
• Inventory labels
• Serial-number labels

Barcode readability depends on the printer and barcode design, not on the applicator.

Retail Applications

Potential retail uses include:

• Small price labels
• Promotional labels
• Product identification
• Sale stickers
• Shelf preparation
• Small merchandise labels

The 292 g tool weight also makes APN10-30 slightly lighter than APN-30.

Manufacturing Applications

Possible uses include:

• Small component labels
• Inspection stickers
• Product identification
• Work-in-process labels
• Serial-number labels
• Quality-control labels

For very small components, surface shape and label adhesive should also be considered.

Electronics Applications

The APN10-30 may be particularly relevant where products use small labels, such as:

• Electronic components
• Cables
• Small devices
• Accessories
• Parts bins
• Serial-number labels

The actual label must still meet TOWA's material and dimensional requirements.

Warehouse Applications

Potential warehouse uses include:

• Small inventory labels
• Bin labels
• Routing stickers
• Inspection labels
• Internal tracking labels

For larger warehouse labels, APN-60 or APN-100 may be more appropriate.

APN10-30 vs APN-30

TOWA APN10-30

• Width: 20–30 mm
• Length: 10–60 mm
• Gap: 2 mm
• Weight: approx. 292 g
• Designed specifically for smaller labels

TOWA APN-30

• Width: 20–30 mm
• Length: 18–60 mm
• Gap: 2–3 mm
• Weight: approx. 294 g

Choose APN10-30 when labels are shorter than 18 mm or when the application is specifically based around very small labels.

APN10-30 vs APF-30

APN10-30

Best for:

• Small rectangular labels
• Short labels down to 10 mm
• Standard rectangular roll media

APF-30

Best for:

• Round labels
• Oval labels
• Irregular shapes
• Labels 20–30 mm wide

The two models should not be treated as alternatives based only on width.

Label shape and minimum label length are the deciding factors.

No Power Required

APN10-30 is fully mechanical.

It requires no:

• Electricity
• Battery
• Charger
• Software
• Network
• Compressed air

This makes it suitable for portable manual labeling in retail, manufacturing, packaging and warehouse environments.

Purpose of Use

The APN10-30 is intended to simplify repetitive application of small labels.

Instead of:

Peel Tiny Label by Hand → Position → Apply

the workflow becomes:

Load Roll → Squeeze Handle → Apply Label

This can be useful where small labels are difficult to handle manually.

Compatibility

Before ordering, verify:

• Label width
• Label length
• Label gap
• Liner width
• Roll diameter
• Core diameter
• Label thickness
• Label material
• Label shape
• Winding direction
• Product surface
• Required quantity

For very small or unusual labels, sample testing is recommended.

Things to Verify Before Ordering

Please provide:

Label Width

Label Length

Gap Between Labels

Release-Liner Width

Roll Outside Diameter

Core Diameter

Label Material

Label Thickness

Label Shape

Required Quantity

A sample roll or technical drawing is especially useful for labels near the minimum 10 mm length.

Who Should Consider TOWA APN10-30?

The APN10-30 may suit businesses that:

• Use small rectangular labels
• Need labels as short as 10 mm
• Use 20–30 mm label widths
• Need portable manual label application
• Do not require electricity
• Want a purpose-built small-label applicator
• Apply small retail or manufacturing labels

It may not be appropriate where:

• Label width exceeds 30 mm
• Round or oval labels are required
• Automated label application is needed
• Print-and-apply functionality is required

Why NEOTECH® UAE?

The key question for APN10-30 is not only:

“Is my label 20–30 mm wide?”

It is also:

“Is the label shorter than 18 mm?”

If yes, APN10-30 may be the correct model.

If the label is longer and rectangular, standard APN-30 may already be sufficient.

This helps avoid buying a specialized model where a simpler one would work.

Learn First. Decide Second. Buy Only If It Is Right for Your Needs.

There is absolutely no obligation or pressure to proceed with the purchase with us.

Delivery – UAE

NEOTECH® supplies within the United Arab Emirates only.

Standard Shipping: Free

Order Cut-Off: 14:00 GST

Handling Time: 1–2 business days

Standard Transit: 3–5 business days

Estimated Total Delivery: 4–7 business days

Availability should be confirmed before ordering.

FAQ

Q: What is TOWA APN10-30?
A: It is a manual handheld applicator designed specifically for small rectangular roll labels.

Q: What label width does APN10-30 support?
A: Approximately 20–30 mm.

Q: What label length does it support?
A: Approximately 10–60 mm.

Q: What is the recommended gap?
A: TOWA specifies approximately 2 mm.

Q: What is the maximum liner width?
A: Approximately 34 mm.

Q: What is the maximum roll diameter?
A: Approximately 100 mm.

Q: How much does APN10-30 weigh?
A: Approximately 292 g.

Q: Does APN10-30 require power?
A: No. It is mechanically operated.

Q: Why choose APN10-30 instead of APN-30?
A: APN10-30 handles labels as short as 10 mm, while APN-30 starts at 18 mm.

Q: Can APN10-30 apply round labels?
A: It is intended for rectangular labels. For round or oval labels, consider the APF Series.

Q: Can APN10-30 apply barcode labels?
A: Yes, if the label dimensions and media construction are compatible.

Q: Does it print labels?
A: No. It only applies pre-printed labels.

Q: Can it apply RFID labels?
A: Potentially, if the RFID label is rectangular and its construction and dimensions are compatible. It does not encode RFID.

Q: Can it use synthetic labels?
A: Some synthetic, film and specialty labels may require testing before use.

Q: What thickness is recommended?
A: TOWA recommends 50 μm or greater.

Q: What core size is recommended?
A: At least 25 mm, with approximately 38–51 mm preferred.

Q: Is APN10-30 made in Japan?
A: Yes. TOWA identifies the APN Series as made in Japan.

Related Products

• TOWA APN-30 Label Applicator
• TOWA APN-60 Label Applicator
• TOWA APN-100 Label Applicator
• TOWA APF-30 Label Applicator
• Manual Label Applicators
• Small Barcode Labels
• Product Labels
• Thermal Transfer Label Printers

Helpful Internal Links

• Handheld Label Applicators
• Small Barcode Labels
• Product Identification Labels
• Label Printers
• Thermal Transfer Printers
• Retail Labeling
• Manufacturing Labeling
• NEOTECH® Learning Center

Contact

For product inquiries and label compatibility verification:

Email: support@neotech.ae

Address: Store 13, Computer Bldg, Al Fahidi, Bur Dubai, Dubai 44245, UAE

Please provide the TOWA APN10-30 requirement, quantity and exact label-roll dimensions where possible.

Disclaimer

NEOTECH® is operated by NEOLYN TECHNOLOGY LLC in the UAE.

TOWA, APN, APF and associated product names and trademarks belong to their respective owners. NEOTECH® does not claim manufacturer authorization or endorsement unless separately documented.

This page specifically describes the TOWA APN10-30.

TOWA's current product information specifies approximately 20–30 mm label width, 10–60 mm label length, 34 mm maximum liner width, 2 mm recommended gap and 100 mm maximum roll outside diameter.

Label compatibility also depends on shape, material, thickness, liner construction, core diameter and winding.

Specialty film or synthetic labels may require advance testing.

The APN10-30 is a manual label applicator. It does not print labels or encode RFID tags.

Images may show sample labels for illustration.

Last Updated: 16 September 2026 (GST, UTC+4)