Soft direct thermal pediatric patient-identification wristband with adhesive closure for compatible Zebra HC100 and ZD510-HC healthcare wristband printers.

Manufacturer Part Number: 10015357K

Zebra Z-Band UltraSoft 10015357K Pediatric Wristband in UAE

The Zebra Z-Band UltraSoft 10015357K is a pediatric direct thermal patient-identification wristband designed for healthcare environments where clear, scannable and comfortable wrist identification is required.

Zebra identifies part number 10015357K as the pediatric-size UltraSoft wristband, measuring approximately 1 inch × 7 inches / 25 × 178 mm. It uses an adhesive closure and is designed for direct thermal printing, so no thermal transfer ribbon is required.

This wristband is supplied in cartridge format for compatible Zebra healthcare wristband printers including the HC100 and ZD510-HC platforms. Zebra’s healthcare supplies catalog lists this pediatric size at 250 wristbands per roll/cartridge and 6 rolls per carton.

Exact Product Identification

Brand: Zebra

Product Family: Z-Band UltraSoft

Part Number: 10015357K

Product Type: Pediatric Healthcare Identification Wristband

Print Method: Direct Thermal

Colour: White

Size: Approximately 1" × 7"

Metric Size: Approximately 25 × 178 mm

Closure: Adhesive

Format: Cartridge

Primary Use: Pediatric patient identification

Compatible Printer Family: Zebra HC100 / ZD510-HC

Key Features

• Pediatric-size patient wristband
• Direct thermal printing
• No ribbon required
• Adhesive closure
• UltraSoft construction
• White printable surface
• Approximately 25 × 178 mm
• Designed for barcode and human-readable patient information
• Resistant to common hand sanitizers such as Purell® according to Zebra
• Scannable for up to 14 days under Zebra’s stated conditions
• Cartridge-based loading
• Compatible with Zebra healthcare wristband printers
• Intended for healthcare patient-identification workflows

Zebra describes the UltraSoft line as one of its softest direct thermal wristband materials and specifically notes resistance to hand sanitizers such as Purell®.

Technical Specifications

Manufacturer: Zebra Technologies

Product Family: Z-Band UltraSoft

MPN: 10015357K

Size Category: Pediatric

Dimensions: 1" × 7"

Metric Dimensions: Approx. 25 × 178 mm

Printing Method: Direct Thermal

Ribbon Required: No

Material: Synthetic healthcare wristband material

Closure: Permanent adhesive / adhesive tab

Colour: White

Cartridge Format: Yes

Quantity per Roll / Cartridge: 250

Rolls per Carton: 6

Scannability: Up to 14 days under Zebra-stated use conditions

Sanitizer Resistance: Zebra states resistance to common hand sanitizers such as Purell®

Exact packaging and regional availability should be confirmed before ordering.

What Is Zebra Z-Band UltraSoft?

Z-Band UltraSoft is Zebra’s healthcare wristband family designed for patient identification.

The wristband can carry:

• Patient name
• Patient ID
• Hospital number
• Barcode
• Admission details
• Ward or department information
• Other hospital-defined data

The actual information printed depends on the healthcare facility’s patient-management system and wristband-printing software.

Pediatric Size – 10015357K

The 10015357K is specifically intended for pediatric patients.

It is shorter than the standard adult Z-Band UltraSoft wristband and longer than the infant version.

Typical size comparison:

Adult: 1" × 11"

Pediatric: 1" × 7"

Infant: 1" × 6"

This matters because wristband size should match the patient group and clinical workflow rather than using one size for every patient.

Direct Thermal Printing

The Z-Band UltraSoft 10015357K uses direct thermal printing.

That means:

No Ribbon

No Ink Cartridge

No Toner

The printer creates the image directly on the wristband’s heat-sensitive surface.

This reduces consumable complexity in healthcare wristband-printing workflows.

Adhesive Closure

The wristband uses an adhesive closure.

Once applied correctly, the adhesive tab helps secure the wristband around the patient’s wrist.

The closure should be applied according to the healthcare facility’s procedure and Zebra’s instructions.

The wristband should not be reused after removal.

Barcode Patient Identification

A major purpose of healthcare wristbands is accurate patient identification.

A barcode printed on the wristband can be used in supported workflows such as:

• Patient verification
• Medication administration
• Sample collection
• Laboratory identification
• Treatment verification
• Bedside procedures
• Patient movement
• Registration workflows

The wristband itself does not create a patient-safety system.

A complete workflow may involve:

Hospital Information System

↓

Zebra Healthcare Printer

↓

Z-Band UltraSoft Wristband

↓

Barcode Scanner / Mobile Computer

↓

Clinical Application

The hospital application and process determine how patient identity is validated.

Scannable for Up to 14 Days

Zebra documents Z-Band UltraSoft wristbands as scannable for up to 14 days under its stated conditions.

This should not be interpreted as a guaranteed wear period for every patient or environment.

Actual readability can depend on:

• Printing quality
• Patient activity
• Cleaning products
• Moisture
• Abrasion
• Barcode design
• Scanner
• Clinical environment

For longer-stay patient requirements, the healthcare provider should verify the appropriate Zebra wristband type.

Hand Sanitizer Resistance

Zebra states that Z-Band UltraSoft wristbands resist common hand sanitizers such as Purell®.

This is relevant in healthcare environments where staff and patients may frequently use sanitizer.

Resistance should not be interpreted as proof against every disinfectant, chemical or cleaning process.

Printer Compatibility

Zebra’s healthcare documentation identifies Z-Band wristband cartridges for use with compatible healthcare wristband printers including:

• Zebra HC100
• Zebra ZD510-HC

The exact printer, firmware and cartridge configuration should be verified before ordering.

HC100 Compatibility

The HC100 was specifically designed as a dedicated healthcare wristband printer using cartridge-based media.

The 10015357K cartridge format is associated with this workflow.

For an existing HC100 installation, confirm:

• Printer condition
• Firmware
• Media type
• Wristband size
• Current application

ZD510-HC Compatibility

The ZD510-HC is Zebra’s newer healthcare wristband printer platform.

Zebra’s current healthcare pages continue to position Z-Band wristbands for use with the ZD510-HC family.

The exact regional cartridge and printer compatibility should still be checked before purchase.

Healthcare Applications

The 10015357K may be used in pediatric healthcare environments such as:

• Hospitals
• Pediatric wards
• Children’s hospitals
• Emergency departments
• Outpatient clinics
• Day-surgery units
• Diagnostic centres
• Pediatric treatment centres

The healthcare facility determines the exact patient-identification workflow.

Pediatric Patient Identification

The primary application is pediatric patient identification.

The wristband may display:

• Patient name
• Patient number
• Date of birth
• Barcode
• Admission number
• Ward information
• Other hospital-defined identifiers

Sensitive clinical data should be handled according to the healthcare provider’s privacy and security policies.

Medication Administration Workflows

In supported hospital systems, the wristband barcode may be scanned during medication workflows to help verify that the correct patient is being treated.

This depends on:

• Barcode quality
• Scanner compatibility
• Hospital application
• Clinical procedure
• Staff training

The wristband alone does not guarantee correct medication administration.

Laboratory and Sample Collection

Patient wristbands may also be used in workflows where staff scan the patient before collecting or labeling samples.

This can help link a patient identity to compatible clinical software.

The exact process depends on the healthcare institution’s laboratory and patient-safety procedures.

Emergency Department Use

In emergency departments, fast patient identification can be important.

A cartridge-based wristband system can support rapid printing at registration points where the hospital’s workflow supports it.

Outpatient and Day-Care Use

Pediatric wristbands may also be used in:

• Outpatient procedures
• Day surgery
• Diagnostic testing
• Short-stay units
• Observation wards

The healthcare provider should determine whether a wristband is required for the patient’s intended care pathway.

Comfort Considerations

Zebra positions UltraSoft as a softer wristband material designed for patient comfort.

This can be especially relevant for children, where rigid or rough wristband material may cause discomfort.

However, correct sizing and application remain important.

The wristband should not be fitted too tightly.

Wristband Size Selection

Choosing the correct wristband size is important.

The 10015357K is designed for pediatric use, but patient wrist size varies.

For very small patients, an infant-size wristband may be more appropriate.

For larger children or adolescents, an adult-size wristband may be more suitable.

Clinical staff should follow their facility’s wristband-sizing procedure.

Quantity and Packaging

Zebra’s healthcare supplies catalog lists 10015357K as:

250 wristbands per roll/cartridge

6 rolls/cartridges per carton

This packaging information should still be confirmed against the supplier quotation because regional packaging may change.

Things to Verify Before Ordering

Please confirm:

• Part number: 10015357K
• Required quantity
• Pediatric size requirement
• Printer model
• Zebra HC100 or ZD510-HC
• White wristband requirement
• Direct thermal requirement
• Cartridge format
• Hospital software compatibility
• Barcode format
• Expected patient stay duration
• Required packaging quantity
• Warranty/returns terms for consumables

For healthcare consumables, part-number accuracy is especially important because opened cartridges may not be returnable depending on supplier policy.

Who Should Consider Zebra 10015357K?

This product may be appropriate for healthcare organizations requiring:

• Pediatric patient identification
• Direct thermal wristband printing
• Zebra HC100 compatibility
• Zebra ZD510-HC compatibility
• Adhesive closure
• Barcode patient ID
• Cartridge-based wristband media
• Soft wristband material

It is not a general-purpose event wristband.

It is intended for healthcare identification workflows.

Why NEOTECH® UAE?

Healthcare consumables should be selected by exact part number and patient group.

For Zebra 10015357K, the most useful checks are:

Do you need pediatric size?

Which Zebra wristband printer do you use?

Is 1" × 7" the correct size?

Do you need direct thermal cartridge media?

What barcode format does your hospital system print?

Confirming these details before ordering helps reduce wrong-media purchases.

NEOTECH® primarily focuses on straightforward product supply and compatibility verification.

Clinical workflow design, patient-safety procedures, hospital-system integration and medical-policy decisions remain the responsibility of the healthcare provider and its qualified clinical/IT teams.

Learn First. Decide Second. Buy Only If It Is Right for Your Needs.

There is absolutely no obligation or pressure to proceed with the purchase with us.

Delivery – UAE

NEOTECH® supplies within the United Arab Emirates only.

Standard Shipping: Free

Order Cut-Off: 14:00 GST

Handling Time: 1–2 business days for applicable available items

Standard Transit: 3–5 business days

Estimated Standard Delivery: 4–7 business days

Availability of 10015357K should be confirmed before ordering.

Healthcare consumables and project quantities may have different lead times.

FAQ - Zebra Z-Band UltraSoft 10015357K

Q: What is Zebra 10015357K?
A: It is a Zebra Z-Band UltraSoft pediatric direct thermal healthcare wristband.

Q: What size is 10015357K?
A: Approximately 1" × 7" / 25 × 178 mm.

Q: Is 10015357K for adults?
A: No. Zebra identifies this part number as the pediatric size.

Q: Is there an adult version?
A: Yes. Zebra offers adult Z-Band UltraSoft part numbers such as 10015355K and 10015356K.

Q: Is there an infant version?
A: Yes. Zebra identifies 10015358K as the infant 1" × 6" version.

Q: Does it require ribbon?
A: No. It is direct thermal.

Q: What colour is 10015357K?
A: White.

Q: What closure does it use?
A: Adhesive closure.

Q: Is it resistant to hand sanitizer?
A: Zebra states resistance to hand sanitizers such as Purell®.

Q: How long can the barcode remain scannable?
A: Zebra states up to 14 days under its test/use conditions.

Q: How many wristbands are in one cartridge?
A: Zebra lists 250 wristbands for 10015357K.

Q: How many cartridges are in a carton?
A: Zebra lists 6 per carton.

Q: Does it work with Zebra HC100?
A: Yes, Zebra documents Z-Band UltraSoft cartridges for HC100 healthcare wristband printing.

Q: Does it work with Zebra ZD510-HC?
A: Zebra’s current healthcare wristband documentation identifies Z-Band wristbands for the ZD510-HC platform.

Q: Is this an event wristband?
A: No. It is intended for healthcare patient identification.

Q: Can hospitals print barcodes on it?
A: Yes. It is intended for direct thermal printing of patient-identification information including compatible barcodes.

Q: Is this a medical device?
A: It should be treated as a healthcare identification consumable. Clinical use and patient-identification policy are determined by the healthcare provider.

Q: What information should I provide for quotation?
A: Please provide part number 10015357K, quantity, printer model and intended healthcare application.

Related Products

• Zebra Z-Band UltraSoft 10015355K Adult Wristband
• Zebra Z-Band UltraSoft 10015356K Adult Wristband
• Zebra Z-Band UltraSoft 10015358K Infant Wristband
• Zebra ZD510-HC Healthcare Wristband Printer
• Zebra HC100 Wristband Printer
• Healthcare Barcode Scanners
• Patient Identification Wristbands

Helpful Internal Links

• Zebra Healthcare Wristbands
• Zebra ZD510-HC Printer
• Healthcare Barcode Printers
• Patient Identification Solutions
• Barcode Scanners
• NEOTECH® Learning Center

Contact - NEOTECH® UAE

For product inquiries and compatibility verification:

Email: support@neotech.ae

Address: Store 13, Computer Bldg, Al Fahidi, Bur Dubai, Dubai 44245, UAE

Please provide:

Part Number: 10015357K

Required Quantity

and your Zebra wristband printer model.

Disclaimer - NEOTECH® UAE

NEOTECH® is operated by NEOLYN TECHNOLOGY LLC in the UAE.

Zebra, Z-Band, HC100, ZD510-HC and associated product names and trademarks belong to their respective owners. NEOTECH® does not claim manufacturer authorization, distributorship or endorsement unless separately documented.

This page refers specifically to Zebra part number 10015357K.

Size, packaging, performance and compatibility information is based on Zebra’s current healthcare wristband documentation. Specifications and packaging may change.

Scannability, sanitizer resistance and durability can vary according to printing conditions, patient use, environmental exposure and scanner performance.

This wristband is intended to support patient identification but does not itself guarantee patient safety or clinical accuracy.

Clinical policies, patient-identification procedures, barcode standards and healthcare-system integration remain the responsibility of the healthcare provider.

Images may be illustrative. Exact packaging, regional availability and commercial terms should be verified before ordering.

Last Updated: 14 September 2026 (GST, UTC+4)