Compact 300 dpi label printing for small text, barcodes, and detailed identification labels.

cab EOS1 300 dpi Desktop Label Printer The cab EOS1 300 dpi is a compact desktop label printer designed for thermal-transfer and direct-thermal printing. Its 300 dpi printhead provides greater detail than a standard 203 dpi model, making it suitable for applications involving smaller text, compact barcodes, detailed graphics, and limited label space.

The EOS1 accommodates label rolls up to approximately 152 mm in outside diameter and supports a maximum print width of approximately 105.7 mm in the 300 dpi configuration. cab specifies printing speeds up to 125 mm per second.

Overview

The EOS1 was developed as a compact printer for workplaces where available counter or desk space is limited. It combines label printing, a touchscreen interface, media handling, and connectivity within one desktop unit.

The printer supports:

• Thermal-transfer printing using a compatible ribbon
• Direct-thermal printing without a ribbon
• Roll-fed and selected continuous media
• Computer-connected printing
• Stand-alone operation using stored label formats and compatible input devices

cab documents stand-alone operation using label formats prepared through cab software and stored internally or on compatible media.

Why Choose 300 dpi?

Print resolution affects how much detail can be reproduced within a given label area.

A 300 dpi printer may be preferable when the application includes:

• Small text
• Compact product labels
• Dense one-dimensional barcodes
• Smaller two-dimensional codes
• Fine lines or graphics
• Laboratory or component identification
• Labels with limited printable space

A 203 dpi printer may remain suitable for larger shipping, carton, warehouse, and general-purpose labels. Higher resolution does not automatically make every application better; the correct choice depends on label dimensions, barcode size, print speed, and scanning requirements.

Key Features

300 dpi print resolution

The 300 dpi printhead supports more detailed output than the 203 dpi version and provides a maximum print width of approximately 105.7 mm.

Two printing methods

The EOS1 supports:

• Thermal transfer: Uses a ribbon and is generally chosen when greater print durability is required.
• Direct thermal: Prints on heat-sensitive media without a ribbon and is commonly used for shorter-life labels.

Compact desktop design

The EOS1 is intended for small workspaces and accepts rolls up to approximately 152 mm in diameter.

Touchscreen operation

The integrated touchscreen provides access to printer functions, status information, and configuration controls.

Adjustable media handling

The printer includes adjustable label guidance, ribbon handling, and gap or reflective media sensing. cab states that the sensor position can be adjusted according to the media being used.

Replaceable wear components

cab documents that the printhead can be removed by hand and the print roller can be removed without tools for maintenance or replacement.

Technical Specifications

Manufacturer: cab Produkttechnik GmbH & Co KG

Model: EOS1

Product type: Desktop barcode and label printer

Print methods: Thermal transfer and direct thermal

Print resolution: 300 dpi

Maximum print width: Approximately 105.7 mm

Print speeds: 30, 40, 50, 75, 100, or 125 mm per second, depending on configuration and operating conditions

Maximum label-roll outside diameter: Approximately 152 mm

Supported material types: Selected paper, cardboard, textile, and synthetic materials, subject to cab media specifications

Media sensing: Gap and reflective sensing

Operation: Integrated touchscreen interface

Connectivity: USB and Ethernet; additional interface support depends on exact configuration

Power supply: 100–240 VAC, 50/60 Hz

Printing mode: Computer connected or stand-alone operation, subject to configuration

Printhead replacement: Tool-free manual removal documented by cab

Print-roller replacement: Tool-free removal documented by cab

Specifications should be verified against the exact unit, part number, production revision, and supplied accessories.

Applications

The cab EOS1 300 dpi may be considered for:

• Product identification labels
• Retail item labels
• Small barcode labels
• Electronics and component labels
• Laboratory and sample labels
• Asset identification
• Inventory labels
• Shelf and bin labels
• Healthcare identification applications
• Small packaging labels
• Compliance and traceability labels

Suitability depends on the required label material, barcode dimensions, print durability, adhesive, environmental exposure, and software integration.

Purpose of Use

The EOS1 300 dpi is intended for businesses that need compact desktop label printing with greater detail than a standard 203 dpi printer.

It may be appropriate where:

• Label space is limited
• Text must remain readable at a smaller size
• Barcode modules need greater definition
• Detailed symbols or graphics are required
• Thermal-transfer durability is preferred
• Desktop installation is more suitable than an industrial printer

It may not be the correct choice for very high-volume, harsh-environment, or wide-format industrial applications.

Media and Ribbon Guidance

Direct thermal

Direct-thermal printing uses heat-sensitive labels and does not require a ribbon.

It is often used for:

• Short-life identification labels
• Temporary inventory labels
• Retail or logistics labels
• Internal operational labels

Direct-thermal output may be affected by heat, sunlight, friction, plasticisers, or chemicals.

Thermal transfer

Thermal-transfer printing requires a ribbon matched to the label material.

Typical combinations include:

• Wax ribbon with many paper labels
• Wax-resin ribbon where improved abrasion resistance is needed
• Resin ribbon with selected synthetic materials and demanding applications

The ribbon width, winding direction, roll dimensions, label face material, adhesive, and durability requirements should be confirmed before ordering consumables.

Compatibility

The EOS1 may work with compatible Windows drivers, label-design applications, cab software, and business systems capable of sending supported print commands.

Compatibility depends on:

• Operating system
• Printer driver
• Label-design software
• Communication interface
• Printer language
• Barcode requirements
• Database or ERP integration
• Media sensor requirements
• Existing label templates

cab provides documentation, drivers, firmware, and software resources for the EOS1/EOS4 family through its support portal.

Stand-Alone Operation

The EOS1 can support printing without a continuously connected host computer when the required label layouts and data are prepared and stored appropriately.

Depending on the workflow, variable data may be entered through compatible devices such as:

• Keyboard
• Barcode scanner
• Stored files
• Supported database or software connections

The exact stand-alone setup should be tested against the intended application before deployment.

Things to Verify Before Ordering

Please confirm:

• Exact cab part number
• 300 dpi requirement
• Required print width
• Label width and height
• Roll outside diameter
• Core diameter
• Gap, mark, or continuous-media sensing
• Direct-thermal or thermal-transfer operation
• Ribbon width, length, and winding
• USB or Ethernet requirements
• Required cutter or tear-off configuration
• Software and driver compatibility
• Barcode type and minimum dimensions
• Label material and adhesive
• Included power cable
• Included software or accessories
• Current availability
• Warranty source and terms

Because the EOS1 belongs to an earlier cab printer family, current supply may involve remaining stock, replacement units, or previously sourced configurations. Availability and warranty should therefore be confirmed before purchase.

Who Should Consider This Printer?

The EOS1 300 dpi may suit:

• Retailers printing small product labels
• Laboratories requiring detailed identification
• Electronics businesses printing component labels
• Warehouses needing compact asset or location labels
• Healthcare and service environments
• Businesses requiring a desktop thermal-transfer printer
• Users with existing cab label workflows

A different model may be preferable where:

• Industrial-duty construction is required
• Larger media rolls are needed
• Very high print volumes are expected
• Wider labels are required
• Mobile printing is needed
• Current-generation cab hardware is preferred

Maintenance Guidance

Routine maintenance may include:

• Cleaning the printhead
• Cleaning the print roller
• Removing adhesive and label dust
• Cleaning the media sensor
• Checking ribbon alignment
• Inspecting media guides
• Replacing worn printheads or rollers when necessary

The printer should be powered down and serviced according to cab’s operating and safety instructions.

Why NEOTECH® UAE

NEOTECH® provides product information, compatibility guidance, and business-focused support for barcode, POS, RFID, and printing equipment.

Before purchase, we encourage customers to verify:

• Exact model and part number
• Resolution
• Media and ribbon requirements
• Software compatibility
• Interface requirements
• Current supply status
• Warranty terms
• Delivery timeframe

There is absolutely no obligation or pressure to proceed with the purchase with us.

Learn First. Decide Second. Buy Only If It Is Right for Your Needs.

Delivery – UAE

Service area: United Arab Emirates

Order cutoff: 2:00 PM GST

Handling time: 1–2 business days, subject to availability

Transit time: 3–5 business days

Estimated total delivery: 4–7 business days

Standard delivery: Free within the UAE

For non-stock, discontinued, or specially sourced configurations, the expected delivery timeline will be confirmed before the order is accepted.

Returns and Exchanges

Eligible products may be returned within 30 days when they remain new, unused, unconfigured, and in their original condition.

• Free printable return label
• No restocking fee
• Exchanges may be available
• Refunds are processed within 15 days after inspection and approval

Printers that have been used, configured, installed, damaged, or returned without complete packaging may not qualify under the new-only return condition.

FAQ - CAB EOS1 300 dpi

Q: What is the difference between the cab EOS1 203 dpi and 300 dpi versions?
A: The 300 dpi version provides greater print detail and a maximum print width of approximately 105.7 mm, while the 203 dpi model provides a slightly wider maximum print area. The correct choice depends on label dimensions, barcode density, required speed, and text size.

Q: Can the EOS1 print barcodes?
A: Yes. It can print supported one-dimensional and two-dimensional barcodes through compatible label software and printer configurations.

Q: Does the printer support direct thermal and thermal transfer?
A: Yes. It supports both methods. Thermal-transfer operation requires a compatible ribbon.

Q: What is the maximum print speed?
A: cab documents selectable print speeds up to 125 mm per second. Actual usable speed depends on resolution, media, ribbon, label design, darkness, and print-quality requirements.

Q: What is the maximum label-roll diameter?
A: The EOS1 supports rolls up to approximately 152 mm in outside diameter.

Q: Does it include Ethernet?
A: Ethernet and USB are documented for the EOS family, but the exact interfaces on the supplied unit should be confirmed from its part number and configuration.

Q: Can it print without a PC?
A: Stand-alone printing is supported when compatible label formats and data are prepared and stored appropriately.

Q: Is the EOS1 a current cab model?
A: The EOS1 belongs to an earlier cab EOS product family. Buyers should confirm current availability, support status, warranty, and whether a newer cab model would better suit the application.

Q: Are labels and ribbons included?
A: Consumables should be treated as separate unless they are expressly listed in the quotation or package contents.

Q: Is 300 dpi always better than 203 dpi?
A: No. A higher resolution is useful for smaller or more detailed printing, but 203 dpi may be more economical and suitable for larger standard labels.

Related Products

• cab EOS1 203 dpi Label Printer
• cab EOS2 Label Printer
• cab EOS5 Label Printer
• cab MACH 4S Label Printer
• Desktop barcode printers
• Thermal-transfer ribbons
• Direct-thermal labels
• Synthetic barcode labels
• Printer cleaning supplies
• Compatible printheads and rollers

Helpful Internal Links

• Desktop Barcode Printers
• Thermal-Transfer Label Printers
• Barcode Labels
• Thermal-Transfer Ribbons
• Direct Thermal vs Thermal Transfer
• How to Choose 203 dpi or 300 dpi
• Barcode Printer Maintenance
• Label and Ribbon Compatibility Guide

Contact NEOTECH® UAE

For configuration, compatibility, or availability enquiries:

WhatsApp: +971 50 739 1234
Email: support@neotech.ae

Please provide the required label size, material, print volume, barcode type, connectivity, and software environment so the application can be reviewed accurately.

Disclaimer - NEOTECH® UAE

Product information is based on available cab documentation and may vary by part number, production revision, installed options, condition, or supply source. Images are for general reference and may not show the exact configuration offered.

NEOTECH® is operated by NEOLYN TECHNOLOGY LLC. No manufacturer-authorisation, distributorship, or official-representative claim is made unless supported by current written documentation.

Customers should verify the exact product configuration, condition, interfaces, accessories, media compatibility, warranty source, and delivery timeframe before purchase.

Last Updated: 02 August 2026  (GST, UTC+4)