Entrust
Entrust DuraGard Clear Laminate 508668-701 – NEOTECH® UAE
Entrust DuraGard Clear Laminate 508668-701 – NEOTECH® UAE
Couldn't load pickup availability
0.5 mil Clear Full-Card Laminate for Professional ID Card Protection – 350 Laminations
Brand: Entrust
Product Series: DuraGard
Part Number: 508668-701
Product Type: Clear ID Card Laminate
Thickness: 0.5 mil
Yield: 350 Laminations
Entrust DuraGard 508668-701 Clear Full-Card Laminate
The Entrust DuraGard 508668-701 is a clear, full-card protective laminate designed for compatible Entrust ID card printing and lamination systems.
With a thickness of 0.5 mil (approximately 12.7 microns), this laminate adds a protective layer over printed plastic identification cards to help reduce wear caused by regular handling, abrasion and exposure to everyday environmental conditions.
The manufacturer specifies a yield of 350 laminations per roll. The product is listed in Entrust's official supplies documentation for compatible Sigma DS2 and Sigma DS3 card lamination systems.
The laminate is suitable for organisations producing employee identification cards, student IDs, membership cards and other compatible plastic credentials requiring additional surface protection.
Important: Part number 508668-701 is a lamination consumable, not an ID card printer or lamination module. A compatible printer equipped with a suitable card lamination module is required.
Product Overview
Manufacturer: Entrust
Brand: Entrust
Product Family: DuraGard
Manufacturer Part Number: 508668-701
Product Description: DuraGard Laminate, 0.5 mil, Clear, Full Card
Product Category: ID Card Printer Lamination Consumable
Laminate Type: Clear Protective Laminate
Coverage: Full Card
Thickness: 0.5 mil (0.0005in / 12.7µm)
Manufacturer-Rated Yield: 350 Laminations
Supply Format: Laminate Roll
Primary Application: Plastic ID Card Surface Protection
Compatible Printer Families: Selected Entrust Sigma DS2 and DS3 Systems with Lamination Modules
Card Format: Compatible Standard ID Cards, Subject to System Verification
Colour: Transparent
Product Status: Listed in Entrust Supplies Documentation
Availability: Subject to Supplier Confirmation
Key Features
- 0.5 mil Laminate Thickness: Provides a thin protective layer over compatible printed cards.
- 350-Lamination Yield: Manufacturer-rated capacity of 350 laminated card surfaces per roll.
- Clear Finish: Allows printed photographs, text and graphics to remain visible.
- Full-Card Format: Provides broad card-surface coverage, subject to the laminate patch dimensions.
- Improved Wear Resistance: Helps reduce surface damage caused by regular card handling.
- Protective Card Finishing: Adds a separate protective laminate after card printing.
- Sigma System Compatibility: Listed for selected Entrust Sigma DS2 and DS3 lamination systems.
- Professional ID Card Applications: Suitable for compatible employee, student, membership and organisational credentials.
Technical Specifications
Brand: Entrust
Series: DuraGard
Part Number: 508668-701
Manufacturer Description: DuraGard Laminate, 0.5 mil, Clear, Full Card
Consumable Type: Protective Card Laminate
Laminate Finish: Clear
Laminate Thickness: 0.5 mil
Metric Thickness: Approximately 12.7 Microns
Coverage Type: Full Card
Rated Yield: 350 Laminations
Supply Unit: Roll
Printing Function: None – Lamination Consumable Only
Compatible Printer Family: Selected Entrust Sigma DS2 / DS3 Systems
Lamination Module: Required
Smart-Card Window: Not Specified for This Full-Card Variant
Magnetic Stripe Cutout: Not Specified for This Full-Card Variant
Country of Origin: Confirm Against Supplied Packaging
Storage Conditions: Follow Manufacturer Instructions
Warranty: Subject to Applicable Manufacturer and Supplier Terms
Full-Card Protection
The DuraGard 508668-701 is designed to provide a clear protective laminate over compatible printed ID cards.
Potential benefits include:
- Reduced surface abrasion during normal handling
- Additional protection for printed photographs and graphics
- Improved resistance to routine card wear
- Protection for frequently handled identification cards
- A more durable finish than an unlaminated printed surface
Full-card laminate does not necessarily cover every millimetre to the card edge. Actual coverage depends on the laminate design and the compatible lamination system.
No specific card service life is guaranteed. Durability depends on card material, printing method, laminate application and environmental conditions.
Understanding 0.5 mil Thickness
The term 0.5 mil refers to laminate thickness, not millimetres.
0.5 mil: 0.0005 inch
Metric Equivalent: Approximately 0.0127mm
Micron Equivalent: Approximately 12.7µm
This is a thin protective laminate intended for compatible card-finishing applications.
Customers requiring thicker laminate or specialised security features should confirm the appropriate Entrust part number before ordering.
350-Lamination Yield Explained
Entrust specifies a yield of 350 laminations for part number 508668-701.
Single-Sided Lamination: Up to 350 card surfaces per roll under the specified operating conditions.
Double-Sided Lamination: Two laminate applications are generally required per card when both sides receive the same laminate.
Actual Consumption: Depends on printer configuration, lamination settings and material handling.
The manufacturer-rated yield should not be interpreted as a guarantee of 350 completed double-sided laminated cards.
Printer Compatibility
Entrust's official supplies documentation identifies DuraGard 508668-701 for Sigma card lamination systems.
Relevant printer families include:
- Entrust Sigma DS2 with Compatible Card Lamination Module
- Entrust Sigma DS3 with Compatible Card Lamination Module
Compatibility requires more than matching the printer model name. The printer must have a supported lamination configuration.
Before ordering, confirm:
- Exact printer model and part number
- Installed card lamination module
- Lamination module configuration
- Card material and thickness
- Laminate supply compatibility
- Firmware and operating requirements
A standard Sigma DS2 or DS3 printer without a compatible lamination module cannot apply this laminate.
Compatibility with unrelated Entrust printer families should not be assumed.
Applications & Industries
Corporate Offices: Employee identification cards, staff badges and internal organisational credentials.
Schools & Universities: Student ID cards, faculty identification and campus membership cards.
Healthcare Administration: Staff identification and compatible administrative credentials.
Hotels & Hospitality: Employee identification, membership cards and visitor credentials.
Security & Facility Management: Personnel identification cards used in compatible access-control programmes.
Events & Exhibitions: Staff, exhibitor and event credentials requiring protective finishing.
Retail & Membership Organisations: Club cards, loyalty membership cards and organisational identification.
Government Administration: Internal identification applications, subject to applicable requirements and system suitability.
Full-Card vs Smart-Card Window Laminate
Entrust offers different DuraGard laminate configurations.
508668-701: 0.5 mil, clear, full-card laminate, 350 laminations.
508668-702: 0.5 mil, clear, full-card laminate with smart-card window, 350 laminations.
508668-903: 0.5 mil, clear laminate with magnetic stripe accommodation, 350 laminations.
508785-701: 1.0 mil, clear, full-card laminate, 300 laminations.
These part numbers are not automatically interchangeable.
Cards with contact chips, magnetic stripes or other functional features may require a laminate with an appropriate cutout or window.
Laminate vs Printer Topcoat
A protective laminate and a printer-applied topcoat are different consumables.
DuraGard Laminate: A separate protective laminate applied using a compatible lamination module.
Printer Topcoat: A thinner protective coating applied during certain ribbon-based card-printing processes.
The required level of protection depends on the card application, expected handling and operating environment.
A standard colour ribbon topcoat should not be described as equivalent to a DuraGard laminate.
Product Status & Alternatives
Product: Entrust DuraGard Clear Full-Card Laminate
Part Number: 508668-701
Manufacturer Documentation: Listed in Entrust Supplies Documentation
Discontinued Status: No Official Discontinuation Notice Verified
Official Replacement: Not Confirmed
Current Availability: Subject to Supplier Confirmation
Related Options:
- 508668-702: 0.5 mil clear laminate with smart-card window
- 508668-903: 0.5 mil clear laminate for magnetic stripe applications
- 508785-701: 1.0 mil clear full-card laminate
- 508832-701: Clear full-card topcoat
These are different consumable configurations rather than confirmed direct replacements.
Things to Verify Before Ordering
Exact Part Number: 508668-701
Laminate Type: DuraGard Clear
Thickness: 0.5 mil
Coverage: Full Card
Yield: 350 Laminations
Printer Model: Confirm Exact Entrust Configuration
Lamination Module: Required and Compatible
Card Type: Confirm Material and Thickness
Contact Chip or Magnetic Stripe: Check Required Cutout
Product Condition: New and Unused
Storage and Shelf Life: Verify Before Ordering
Stock and Lead Time: Confirm Before Order Acceptance
Why NEOTECH® UAE?
NEOTECH® provides product information and UAE supply enquiries for Entrust card printers, protective laminates, colour ribbons, cleaning supplies and related identification technology.
We focus on exact manufacturer part numbers to help customers select the appropriate laminate thickness, coverage format and compatible card-finishing equipment.
For Entrust DuraGard 508668-701, we recommend confirming printer compatibility, lamination module configuration and card requirements before placing an order.
Learn First. Decide Second. Buy Only If It Is Right for Your Needs.
Delivery – UAE
Service Area: United Arab Emirates
Currency: AED
VAT: Clearly Identified in the Formal Quotation
Availability: Subject to Supplier Confirmation
Payment Terms: Confirmed Before Order Acceptance
For eligible stocked products:
Standard Shipping: Free Within the UAE
Order Cutoff: 2:00 PM GST
Handling: 1–2 Business Days
Transit: 3–5 Business Days
Estimated Delivery: 4–7 Business Days
Imported or special-order laminates may require a separately confirmed delivery lead time.
Shipping Policy: https://neotech.ae/policies/shipping-policy
Return Policy: https://neotech.ae/policies/refund-policy
Warranty & Repair Policy: https://neotech.ae/pages/warranty-amp-repair-policy
FAQ – Entrust DuraGard 508668-701
Q: What is Entrust DuraGard 508668-701?
A: It is a 0.5 mil clear full-card protective laminate with a manufacturer-rated yield of 350 laminations per roll.
Q: How many cards can Entrust 508668-701 laminate?
A: The rated yield is 350 laminated card surfaces. Completed card quantities depend on whether one or both sides are laminated.
Q: What is the thickness of DuraGard 508668-701?
A: The laminate is 0.5 mil thick, equivalent to approximately 12.7 microns.
Q: Is Entrust 508668-701 transparent?
A: Yes. It is a clear laminate intended to protect printed card information while keeping it visible.
Q: Does Entrust 508668-701 cover the entire card?
A: It is a full-card laminate designed for broad surface coverage. The exact laminated area depends on the manufacturer's patch design and system configuration.
Q: Which printers support Entrust DuraGard 508668-701?
A: It is listed for compatible Entrust Sigma DS2 and Sigma DS3 card lamination systems. Exact compatibility should be verified.
Q: Can I use DuraGard 508668-701 without a lamination module?
A: No. A compatible card lamination module is required.
Q: Does DuraGard laminate improve ID card durability?
A: It can help protect printed card surfaces against normal handling and abrasion. Actual durability depends on the card and operating conditions.
Q: Is DuraGard 508668-701 suitable for smart cards?
A: Cards with exposed contact chips may require the windowed laminate 508668-702. Confirm the card design before selecting a laminate.
Q: What is the difference between 508668-701 and 508668-702?
A: Both are 0.5 mil clear laminates, but 508668-702 has a smart-card window.
Q: What is the difference between 508668-701 and 508785-701?
A: Part number 508668-701 is a 0.5 mil laminate rated for 350 laminations, while 508785-701 is a 1.0 mil laminate rated for 300 laminations.
Q: Is Entrust DuraGard 508668-701 discontinued?
A: No official discontinuation notice was verified. Current ordering availability should be confirmed with the supplier.
Q: Can I order Entrust DuraGard 508668-701 in Dubai?
A: NEOTECH® accepts UAE supply enquiries. Price, availability, product condition and delivery lead time are subject to confirmation.
Related Products
- Entrust Sigma DS3 Duplex Card Printer 525302-003
- Entrust Sigma Dual Lamination Module 529464-002
- Entrust DuraGard 508668-702 Smart-Card Window Laminate
- Entrust DuraGard 508668-903 Magnetic Stripe Laminate
- Entrust DuraGard 508785-701 1.0 mil Clear Laminate
- Entrust Sigma YMCKT Ribbon Kit 525100-004-S100
- Entrust ID Card Printer Cleaning Supplies
Disclaimer – NEOTECH® UAE
Entrust, DuraGard and related product names are trademarks of Entrust Corporation or their respective owners.
This page describes the Entrust DuraGard Clear Full-Card Laminate, manufacturer part number 508668-701, with a published thickness of 0.5 mil and a manufacturer-rated yield of 350 laminations.
Product information is based on published Entrust supplies documentation. Specifications, packaging, printer compatibility and product availability may change.
The laminate requires a compatible card lamination module and is not a standalone printing or lamination device.
Full-card coverage does not necessarily mean edge-to-edge coverage. Card designs containing contact chips, magnetic stripes or other functional areas may require different laminate configurations.
The stated yield is a manufacturer-rated capacity and may differ from the number of completed double-sided cards.
Product condition, storage history, shelf life, package contents, warranty eligibility, AED pricing, applicable VAT and UAE delivery lead time will be confirmed before order acceptance.
NEOTECH® does not claim manufacturer authorisation, endorsement or distributor status without supporting documentation.
Customers should verify the exact printer, lamination module and card requirements before purchase.
Contact – NEOTECH® UAE
Brand: NEOTECH®
Sales Inquiries: NEOLYN TECHNOLOGY LLC
Store: Store 13, Computer Building, Al Fahidi, Bur Dubai, Dubai, UAE
WhatsApp: +971 50 739 1234
Email: support@neotech.ae
The contracting and invoicing company will be identified in the formal quotation and payment instructions.
Last Updated: 19 November 2026 (GST, UTC+4)
Shopify SEO
Product Title: Entrust DuraGard Clear Laminate 508668-701
SEO Meta Title: SEO Meta Description:
URL Handle:
Shopify Vendor: Entrust
Product Type:
SKU: 508668-701
MPN: 508668-701
Shopify Tags:
Product Image ALT Text
Main Image: Entrust DuraGard 508668-701 clear full-card laminate 0.5 mil, 350 laminations
Packaging Image: Entrust DuraGard 508668-701 laminate roll packaging, if shown
Laminate Image: Entrust DuraGard clear protective full-card laminate roll, if shown
Application Image: Compatible plastic ID card with clear protective laminate, if shown