Mains-powered electronic inkjet marking device for printing numbers, dates, time and short text on suitable absorbent and non-absorbent surfaces, with the MP version designed for quick-drying marking on materials such as metal, plastic and glass.

The REINER jetStamp® 792 MP, sometimes searched for or described commercially as Reiner JetPrint2-792MP, is an electronic inkjet marking device from REINER's established jetStamp 790 family.

The important manufacturer model designation is jetStamp 792 MP.

It is designed to apply compact variable information directly onto products, components, packaging and documents. Typical print content includes:

• Numbers
• Date
• Time
• Short text
• Consecutive numbering
• One-line or two-line impressions

The MP designation identifies the version intended for use with compatible quick-drying ink for suitable non-absorbent and smooth surfaces such as metal, plastic and glass, in addition to appropriate conventional marking applications.

Unlike the battery-operated jetStamp 790, the jetStamp 792 is mains powered. This makes it particularly relevant to workstation or stationary applications where continuous operation from an electrical supply is preferable to mobile battery operation.

REINER identifies the jetStamp 990 as the successor to the jetStamp 790/791/792 MP family. Customers planning a completely new installation should therefore compare the older 792 MP requirement with the current REINER product range before ordering.

Learn First. Decide Second. Buy Only If It Is Right for Your Needs.

Key Features

• REINER electronic inkjet marking system
• Manufacturer model: jetStamp 792 MP
• MP version for suitable non-absorbent surfaces
• Mains-powered operation
• Prints numbers, dates, time and text
• One-line and two-line impressions
• Maximum print width approximately 42 mm
• Up to 20 characters per line depending on imprint configuration
• Electronic numbering functions
• Stored imprint formats
• User-friendly LCD display
• PC configuration using compatible REINER PCset easy software
• Suitable for flat and uneven marking positions
• Quick-drying MP ink available for suitable smooth surfaces
• Suitable for workstation and stationary marking applications
• Current successor identified by REINER: jetStamp 990

What Is the REINER jetStamp 792 MP?

The jetStamp 792 MP is an electronic stamp using inkjet technology rather than a traditional mechanical stamping plate.

Information is electronically configured and the print carriage applies the selected imprint to the required surface.

A typical imprint may contain:

LOT 000125

06.09.2026

or another supported combination of text, numbering, date and time.

This makes the system useful where marking information changes regularly and manually changing a conventional stamp would be inconvenient.

Why Choose the MP Version?

The letters MP are important when selecting this REINER model.

Ordinary inks are generally easier to use on absorbent materials because the ink penetrates the surface.

Smooth and non-absorbent materials can be more challenging.

REINER developed MP inks for applications involving suitable materials such as:

• Metal
• Plastic
• Glass
• Coated packaging
• Other smooth or non-absorbent surfaces

REINER's MP4 quick-drying ink, for example, was specifically developed to produce fast-drying markings on suitable smooth materials.

However, no ink should be assumed to perform identically on every material.

Different plastics, coatings, surface treatments and environmental conditions can affect adhesion, drying and resistance to handling.

Mains-Powered Operation

One of the important differences between the jetStamp 790 and 792 is the power arrangement.

The jetStamp 792 operates from its supplied power supply, making it suitable for fixed or workstation-oriented use.

This may be useful where the marking device remains at:

• Production workstation
• Packing table
• Quality-control station
• Goods receiving desk
• Inspection station
• Manufacturing cell

and battery-powered portability is not required.

Customers requiring greater mobile freedom should compare the intended workflow with an appropriate portable REINER model.

What Can the jetStamp 792 MP Print?

The 792 MP is designed primarily for compact alphanumeric marking.

Depending on the selected imprint, information can include:

Numbers

Date

Time

Short Text

Sequential Numbers

REINER provides predefined imprint combinations and also supports customer-specific imprint configurations.

The system supports one-line and two-line impressions.

It should not be treated as a large-format graphics printer. Applications requiring logos, large graphics, QR codes, extensive text or significantly larger print areas should be evaluated against a different REINER marking platform.

Numbering Functions

The jetStamp 792 provides useful electronic numbering functions.

Depending on configuration, numbering can include functions such as:

• Incrementing
• Decrementing
• Repetition
• Skip values
• Defined number ranges
• Leading-zero control

These functions can be useful for serial identification, inspection sequences, production tracking and other applications where numbers need to change systematically between impressions.

Stored Imprints

The jetStamp 792 provides a selection of stored imprint formats.

REINER documentation identifies predefined memory positions for combinations such as:

• Text + Date
• Number + Text
• Number + Date
• Number + Text + Date
• Other configured combinations

Customer-specific impressions can also be prepared within supported memory locations.

This allows the device to be adapted to different marking tasks without mechanically rebuilding a conventional stamp.

Print Size

The jetStamp 792 family supports compact impressions with a maximum print width of approximately:

42 mm

Depending on the selected character format, an imprint can contain up to approximately:

20 characters per line

with one-line or two-line configurations available.

This makes the device suitable for concise identification information rather than large product labels.

PC Configuration with REINER PCset easy

Compatible jetStamp 792 devices can be configured using REINER PCset easy software.

The software can be used to prepare and transfer applicable imprint configurations to the device.

This can simplify setup where a business needs custom text, numbering or date configurations.

Because the jetStamp 792 MP is an established earlier-generation product, customers planning to connect it to a modern computer should verify the current operating-system, interface and software compatibility before purchase.

Printing on Metal

The MP version can be used with appropriate quick-drying ink for suitable metal surfaces.

Possible applications may include:

• Components
• Spare parts
• Fabricated parts
• Metal packaging
• Inspection markings
• Production identification

The actual metal finish matters.

Bare, polished, painted, powder-coated, anodized and treated surfaces may behave differently.

Testing the actual substrate is recommended for important applications.

Printing on Plastic

Plastic should not be treated as one universal surface.

Materials can include:

• ABS
• PET
• PE
• PP
• PVC
• Acrylic
• Other engineered plastics

Ink adhesion can differ substantially between these materials and between untreated and surface-treated versions.

For this reason, the statement “MP ink can print on plastic” should not be interpreted as a guarantee of identical results on every plastic product.

Printing on Glass and Smooth Surfaces

REINER's quick-drying MP ink technology also supports suitable glass and other smooth-surface applications.

Possible uses can include:

• Product identification
• Date information
• Serial numbers
• Batch information
• Packaging identification

Where resistance to rubbing, chemicals, moisture or repeated handling is important, the actual material and ink should be tested under the intended operating conditions.

Technical Specifications

Brand: REINER

Product Family: jetStamp®

Manufacturer Model: jetStamp 792 MP

Product Type: Electronic Inkjet Stamp / Direct Marking Device

Printing Technology: Inkjet

Version: MP

Primary MP Application: Suitable Non-Absorbent / Smooth Surfaces with Compatible Quick-Drying Ink

Print Content: Number, Date, Time and Text

Print Format: One or Two Lines

Maximum Characters: Up to 20 Characters per Line Depending on Format

Maximum Print Width: Approximately 42 mm

Stamping Time: Approximately 0.7 Seconds

Stamping Cycle: More Than 2 Seconds

Approximate Print Capacity: Around 300,000 Characters per Cartridge Under Specified Conditions

Device Dimensions: Approximately 96 × 77 × 170 mm

Device Weight: Approximately 446 g with Cartridge

Power Supply: Supplied External Power Supply

Mains Specification in Manufacturer Documentation: 230V AC, 50Hz / 0.4A

Noise Level: Less Than 60 dB(A)

Protection Rating: IP20

Display: LCD

Configuration Software: REINER PCset easy for Compatible Systems

Exact cartridge, regional power configuration, included accessories and software compatibility should be confirmed for the unit being supplied.

jetStamp 790 MP vs jetStamp 792 MP

Understanding this difference can prevent purchasing the wrong model.

REINER jetStamp 790 MP

Designed around mobile battery-powered operation.

Suitable where the operator needs to carry the marking device between different locations.

REINER jetStamp 792 MP

Designed around mains-powered operation.

Suitable where the marking device is primarily used at a workstation or fixed operating area.

Both belong to the same established product family and share similar compact marking concepts, but the required operating workflow should determine which configuration is appropriate.

jetStamp 792 MP vs jetStamp 990

The jetStamp 792 MP belongs to an earlier REINER generation.

REINER identifies the jetStamp 990 as the successor to the jetStamp 790/791/792 MP family.

A 792 MP may still be specifically required when:

• Replacing existing equipment
• Maintaining an established production process
• Matching an existing fleet
• Continuing an approved marking workflow
• Using established consumables and procedures

For a completely new project, however, customers should also evaluate whether the current jetStamp 990 better meets their requirements.

Applications

The REINER jetStamp 792 MP may be considered for:

• Manufacturing
• Production
• Packaging
• Quality control
• Incoming inspection
• Goods receiving
• Batch coding
• Lot identification
• Serial numbering
• Date marking
• Component identification
• Spare-parts marking
• Metal marking
• Plastic marking
• Glass marking
• Coated packaging
• Warehouse operations
• Workstation-based identification

Suitability depends on the actual substrate, ink and required marking performance.

Purpose of Use

The jetStamp 792 MP is particularly useful when a business needs to apply small amounts of changing information directly to an item at a workstation.

A typical workflow may be:

Place Product

↓

Select Required Imprint

↓

Position jetStamp 792 MP

↓

Trigger Print

↓

Apply Date / Number / Text

↓

Continue to Next Item

The device is therefore different from both a conventional office stamp and a continuously operating industrial production-line coder.

Surface Testing Is Important

For critical applications, NEOTECH® recommends evaluating:

Actual Device

Actual MP Cartridge

Actual Product Surface

Actual Required Imprint

Actual Drying Conditions

Actual Handling Environment

This is especially important if the marking must resist rubbing, handling, moisture, chemicals or other environmental exposure.

Things to Verify Before Ordering

Please confirm:

• Exact requirement for REINER jetStamp 792 MP
• Whether this is a replacement or new installation
• Material being printed
• Whether the material is absorbent or non-absorbent
• Exact plastic, metal, glass or coating where relevant
• Required print information
• One-line or two-line requirement
• Number of characters required
• Date requirement
• Time requirement
• Sequential numbering requirement
• Required ink type and colour
• Required drying characteristics
• PC/software requirement
• Regional power requirement
• Required quantity
• Whether the current jetStamp 990 should also be evaluated

Who Should Consider the jetStamp 792 MP?

The 792 MP may be appropriate for customers who:

• Already operate jetStamp 792 MP equipment
• Need a replacement for an established process
• Need mains-powered electronic stamping
• Print changing dates, numbers or short text
• Need compact marking on suitable non-absorbent surfaces
• Prefer workstation operation rather than battery-powered mobility
• Have verified the required ink and substrate combination

Who May Need Another Solution?

Another marking system should be considered where:

• Full mobility is required
• Large graphics are required
• QR codes or other 2D codes are required
• Larger text areas are required
• High-speed continuous production-line coding is needed
• Automated integration is required
• Modern connectivity is important
• A current-generation REINER platform is preferable

FAQ - REINER jetStamp® 792 MP

Q: Is Reiner JetPrint2-792MP the same as REINER jetStamp 792 MP?

A: The established manufacturer product designation is REINER jetStamp 792 MP. “JetPrint2-792MP” appears as a commercial/product-page naming variation. For quotations and compatibility checks, using the manufacturer's jetStamp 792 MP designation is clearer.

Q: What does MP mean on the jetStamp 792 MP?

A: The MP version is intended for marking suitable non-absorbent and smooth surfaces using compatible quick-drying ink, including applications involving materials such as metal, plastic and glass.

Q: Is the jetStamp 792 MP battery powered?

A: No. The jetStamp 792 is the mains-powered configuration in this product family. Customers needing mobile battery-powered operation should compare the appropriate portable REINER model.

Q: What can the jetStamp 792 MP print?

A: It supports compact one- or two-line impressions containing information such as numbers, date, time and short text. Electronic numbering functions are also available.

Q: Is the jetStamp 792 MP still the newest REINER model?

A: No. It belongs to an established earlier product generation. REINER identifies the jetStamp 990 as the successor to the jetStamp 790/791/792 MP family. Customers starting a new project should compare the current model before deciding.

Related Products

REINER jetStamp 790 MP

REINER jetStamp 791 MP

REINER jetStamp 792

REINER jetStamp 990

REINER jetStamp graphic 970

REINER jetStamp 1025

REINER MP Quick-Drying Ink Cartridges

Helpful Internal Links

NEOTECH® UAE

https://www.neotech.ae/

Why NEOTECH® UAE?

The correct marking system should be selected according to the actual application, not merely a familiar model number.

For the REINER jetStamp 792 MP, important questions include the surface being marked, required ink performance, print content, power arrangement and whether the requirement is for an existing installation or a completely new project.

NEOTECH® encourages customers to verify these points before ordering, particularly because the jetStamp 792 MP belongs to an earlier product generation and REINER now identifies the jetStamp 990 as its successor.

Learn First. Decide Second. Buy Only If It Is Right for Your Needs.

The NEOTECH® Learning Center is free and open to everyone. You do not need to be a NEOTECH® customer to access or benefit from our educational content. Learn at your own pace, explore the information freely, and make informed decisions based on your own needs. There is no obligation or pressure to purchase from NEOTECH®.

There is no obligation or pressure to purchase. Customers are encouraged to verify the exact REINER model, printing surface, required imprint, ink compatibility, power requirement and current-generation alternatives before ordering.

Delivery – UAE

NEOTECH® supports enquiries for REINER marking equipment and compatible consumables within the United Arab Emirates.

Because the jetStamp 792 MP is an established earlier-generation product, exact current availability, configuration, cartridge, package contents, regional power arrangement, delivery time and applicable support should be confirmed before ordering.

Contact NEOTECH® UAE

Website: https://www.neotech.ae/

Email: support@neotech.ae

Address: Store 13, Computer Bldg, Al Fahidi, Bur Dubai, Dubai 44245, United Arab Emirates

Disclaimer - NEOTECH® UAE

REINER, jetStamp and associated model names are trademarks or product identifiers of their respective owner.

NEOTECH® is not represented as the manufacturer of this product.

This page describes the REINER jetStamp 792 MP, which may also be encountered under commercial naming such as “JetPrint2-792MP.” Customers should use the exact manufacturer model and configuration when confirming equipment, cartridges and accessories.

MP ink supports marking on suitable non-absorbent surfaces, but compatibility does not guarantee identical adhesion, drying time or durability on every plastic, metal, glass or coated material. Testing on the actual substrate is recommended for critical applications.

There is absolutely no obligation or pressure to proceed with the purchase with us.

Last Updated: 06 September 2026  (GST, UTC+4)