Manual handheld label applicator for round, oval, rectangular and other compatible label shapes from 20–30 mm wide and 20–60 mm long, with adjustable slidable Mech-Sensor and no external power required.

Brand: TOWA
Model: APF-30
Product Type: Manual Handheld Label Applicator
Country of Manufacture: Japan

URL Handle:

Meta Title:
TOWA APF-30 Handheld Label Applicator | NEOTECH® UAE

Meta Description:
Explore TOWA APF-30 manual label applicator for 20–30mm wide round, oval and rectangular labels with slidable Mech-Sensor and no power required.

TOWA APF-30 Label Applicator in UAE

The TOWA APF-30 is a manual handheld label applicator designed for applying compatible pre-printed roll labels in round, oval, rectangular and other non-rectangular shapes.

Unlike the APN Series, which is primarily intended for square and rectangular labels, the APF Series uses a slidable mechanical sensor that can be manually positioned according to the shape of the label. This allows the APF-30 to handle a wider variety of label shapes while retaining simple mechanical operation.

TOWA specifies the APF-30 for label widths from 20 mm to 30 mm, label lengths from 20 mm to 60 mm, a recommended gap of 2–3 mm, maximum release-liner width of 34 mm, maximum roll outside diameter of 100 mm, and approximate weight of 312 g.

Overview

The APF-30 is the narrowest model in TOWA’s APF Series.

It is particularly useful where the label shape makes a standard fixed-position sensor unsuitable.

A typical workflow is:

Pre-Printed Label Roll

↓

Load Roll into TOWA APF-30

↓

Slide Mech-Sensor to Correct Position

↓

Squeeze Handle

↓

Label Separates from Liner

↓

Apply Label to Product / Package

The applicator requires no electricity, battery or compressed air.

Key Features

TOWA APF-30 manual handheld applicator
Supports round labels
Supports oval labels
Supports square and rectangular labels
Supports other compatible non-rectangular shapes
Label width: 20–30 mm
Label length: 20–60 mm
Recommended gap: 2–3 mm
Maximum liner width: 34 mm
Maximum roll outside diameter: 100 mm
Approximate weight: 312 g
Slidable Mech-Sensor
Manual sensor positioning according to label shape
No electrical power required
No batteries required
Portable manual operation
Suitable for pre-printed general roll labels
Made in Japan

Technical Specifications

Manufacturer: TOWA

Model: APF-30

Product Type: Manual Handheld Label Applicator

Supported Label Shapes: Round, Oval, Rectangular and compatible irregular shapes

Label Width: 20–30 mm

Label Length / Stroke: 20–60 mm

Recommended Gap Between Labels: 2–3 mm

Maximum Release-Liner Width: 34 mm

Maximum Roll Outside Diameter: 100 mm

Approximate Weight: 312 g

Recommended Label Thickness: 50 μm or greater

Recommended Core Diameter: 25 mm or greater

Preferred Core Size: Approximately 38–51 mm / 1.5–2 inches

Recommended Winding: Inner wound

Recommended Release Liner: Glassine paper

Power Requirement: None

Country of Manufacture: Japan

TOWA notes that film, synthetic and other specialty label materials may require advance compatibility checking.

Slidable Mech-Sensor

The main distinction of the APF Series is the slidable Mech-Sensor.

For rectangular labels, the label gap remains relatively consistent across the width of the label.

For round, oval or irregularly shaped labels, the visible gap between labels can vary depending on where the sensor is positioned.

TOWA addresses this by allowing the mechanical sensor to slide left or right until it aligns with the appropriate part of the label.

This allows the applicator to work with a wider variety of label shapes than the standard APN Series.

How to Adjust the Sensor

The operator should slide the Mech-Sensor to a position where it can reliably detect the edge of the label.

TOWA’s guidance describes moving the sensor toward the center or highest point of the label shape as appropriate.

For unusual shapes, testing a sample roll is advisable before purchasing multiple applicators.

No Power Required

The APF-30 is completely mechanical.

It does not require:

AC power
Batteries
Charging
Software
Network connection
Compressed air

This makes it useful for portable manual label application in retail, packaging, warehouse and production environments.

Label Width: 20–30 mm

TOWA specifies:

Minimum Label Width: 20 mm
Maximum Label Width: 30 mm

This makes APF-30 appropriate for relatively narrow shaped labels.

For wider labels, APF-60 or APF-100 should be considered.

Label Length: 20–60 mm

The APF-30 supports label lengths from:

20 mm to 60 mm

This differs slightly from APN-30, which starts at 18 mm.

When label length is close to the minimum, actual media should be tested if the shape is unusual.

Recommended Gap: 2–3 mm

TOWA recommends a label gap of:

2–3 mm

This remains important even with the adjustable sensor because the applicator still needs a detectable separation between labels.

Maximum Liner Width: 34 mm

The maximum supported release-liner width is approximately:

34 mm

Always measure the total liner, not only the printed label.

A 30 mm label on a liner wider than 34 mm may not fit correctly.

Maximum Roll Diameter: 100 mm

The standard maximum roll outside diameter is:

100 mm

Core size, winding direction and liner construction should also be checked.

Core Size

TOWA recommends:

25 mm minimum

with approximately:

38–51 mm / 1.5–2 inches

preferred for normal operation.

Label Material

TOWA recommends paper labels with glassine release liner.

Special materials such as:

Film
Synthetic paper
Specialty constructions

may require testing before use.

Label Thickness

TOWA specifies labels should generally be:

50 μm or thicker.

Very thin labels may not dispense reliably.

Round Label Applications

The APF-30 is especially useful for small round labels.

Potential uses include:

Promotional stickers
Quality-control dots
Product seals
Small inspection labels
Decorative labels
Tamper-evident applications where compatible

Actual suitability depends on label size, liner and material.

Oval Label Applications

Oval labels can also be applied because the sensor position can be adjusted according to the shape.

Possible uses include:

Product branding
Promotional labels
Food packaging labels
Cosmetic labels
Specialty retail labels

Rectangular Label Applications

The APF-30 can also handle rectangular labels within its supported size range.

However, if the customer uses only ordinary rectangular labels, the APN-30 may be simpler and lighter.

APF-30 becomes most valuable when the label shape varies or includes round/oval formats.

Retail Applications

Potential retail uses include:

Promotional stickers
Price labels
Product identification
Sale stickers
Small branding labels
Quality-control labels

The APF-30 can be useful where the label shape itself is part of the product presentation.

Food and Packaging Applications

Possible uses include:

Product seals
Date or batch stickers
Promotional labels
Small package identifiers
Ingredient-related labels
Quality-control labels

Food-contact or regulatory requirements depend on the label material and application, not on the applicator itself.

Cosmetics and Personal Care

Round and oval labels are common in cosmetics and personal-care packaging.

Potential uses include:

Jar labels
Bottle stickers
Promotional seals
Batch stickers
Inspection labels

The product surface should be checked because strongly curved surfaces can affect application quality.

Manufacturing Applications

Possible manufacturing uses include:

Inspection labels
Quality-control stickers
Pass/fail dots
Small component labels
Product identification
Tamper-indicating stickers

The applicator is manual and does not provide automated positioning accuracy.

Warehouse Applications

Potential uses include:

Status labels
Inspection stickers
Small inventory labels
Routing labels
Quality-control marks

For ordinary rectangular warehouse labels, APN may be more cost-efficient; APF is more valuable where label shape requires sensor adjustment.

APF-30 vs APN-30

APF-30

Label width: 20–30 mm
Label length: 20–60 mm
Weight: approx. 312 g
Slidable Mech-Sensor
Supports round, oval and irregular labels
Also supports rectangular labels

APN-30

Label width: 20–30 mm
Label length: 18–60 mm
Weight: approx. 294 g
Fixed automatic Mech-Sensor
Intended primarily for rectangular labels

If the label is rectangular, APN-30 may be lighter and simpler.

If the label is round, oval or irregular, APF-30 is the more appropriate model.

APF-30 vs APF-60

APF-30

Label Width: 20–30 mm

Maximum Liner Width: 34 mm

Approximate Weight: 312 g

APF-60

Label Width: 20–60 mm

Maximum Liner Width: 64 mm

Approximate Weight: 370 g

If all labels are 30 mm or narrower, APF-30 is lighter.

If the customer uses labels wider than 30 mm, APF-60 should be considered.

APF-30 vs APF-100

APF-30

Label Width: 20–30 mm

APF-100

Label Width: 20–100 mm

APF-100 offers much wider media support but is heavier.

Choose the smallest applicator that comfortably supports the customer's label dimensions.

Purpose of Use

The APF-30 is designed to simplify manual application of shaped labels.

Instead of:

Peel Label by Hand → Align Shape → Apply

the operator can use:

Load Roll → Adjust Sensor → Squeeze Handle → Apply

This can reduce repetitive manual peeling while maintaining portability.

How to Use the TOWA APF-30

A typical setup is:

1. Confirm label dimensions and shape

Check width, length, liner, gap and roll size.

2. Load the label roll

Install the compatible roll in the applicator.

3. Feed the liner

Route the web through the dispensing mechanism.

4. Adjust the Mech-Sensor

Slide the sensor to the appropriate position for the label shape.

5. Squeeze the handle

Advance the label web.

6. Apply the exposed label

Position and roll the label onto the required surface.

Compatibility

Before ordering, verify:

Label width
Label length
Label shape
Label gap
Release-liner width
Roll outside diameter
Core diameter
Label thickness
Label material
Winding direction
Product surface
Required quantity

For unusual shapes or specialty materials, sample testing is recommended.

Things to Verify Before Ordering

Please provide:

Label Width

Label Length

Label Shape

Release-Liner Width

Gap Between Labels

Roll Diameter

Core Size

Label Material

Label Thickness

Winding Direction

Required Quantity

A photograph or sample roll can help with compatibility review.

Who Should Consider TOWA APF-30?

The APF-30 may be suitable for businesses requiring:

Round label application
Oval label application
Irregular-shaped label application
20–30 mm label widths
Portable manual operation
No electrical power
Adjustable mechanical label sensing
Retail promotional labeling
Cosmetics labeling
Packaging labeling
Quality-control stickers

It may not be appropriate where:

Labels exceed 30 mm width
Automatic production-line application is needed
The labels are too thin or made from unsupported specialty material
Print-and-apply functionality is required

Why NEOTECH® UAE?

For APF-30, label shape is as important as label size.

The key questions are:

Is the label round, oval, rectangular or irregular?

What is the exact width?

What is the label length?

What is the liner width?

What is the label gap?

What material is the label made from?

These checks help determine whether APF-30 is appropriate or whether APN-30, APF-60 or another model would be more suitable.

NEOTECH® focuses on straightforward hardware and label compatibility review.

For automated labeling, print-and-apply or high-speed production-line systems, a dedicated integration solution should be evaluated separately.

Learn First. Decide Second. Buy Only If It Is Right for Your Needs.

There is absolutely no obligation or pressure to proceed with the purchase with us.

Delivery – UAE

NEOTECH® supplies within the United Arab Emirates only.

Standard Shipping: Free

Order Cut-Off: 14:00 GST

Handling Time: 1–2 business days for applicable available items

Standard Transit: 3–5 business days

Estimated Standard Delivery: 4–7 business days

Availability should be confirmed before ordering.

FAQ

Q: What is the TOWA APF-30?
A: It is a manual handheld label applicator designed for compatible round, oval, rectangular and other shaped roll labels.

Q: What label width does APF-30 support?
A: 20–30 mm.

Q: What label length does it support?
A: Approximately 20–60 mm.

Q: What is the maximum liner width?
A: Approximately 34 mm.

Q: What is the recommended label gap?
A: Approximately 2–3 mm.

Q: What is the maximum roll diameter?
A: Approximately 100 mm.

Q: How much does APF-30 weigh?
A: Approximately 312 g.

Q: Does APF-30 require electricity?
A: No. It is mechanically operated.

Q: Can APF-30 apply round labels?
A: Yes. Round-label capability is one of the main reasons to choose APF rather than APN.

Q: Can APF-30 apply oval labels?
A: Yes. TOWA specifically identifies oval labels as supported by the APF Series.

Q: Can APF-30 also apply rectangular labels?
A: Yes. The APF Series can also handle compatible rectangular labels.

Q: What is the difference between APF-30 and APN-30?
A: APF-30 uses a slidable Mech-Sensor and supports round, oval and irregular shapes. APN-30 is primarily intended for rectangular labels.

Q: Is APF-30 heavier than APN-30?
A: Yes. TOWA lists APF-30 at approximately 312 g and APN-30 at approximately 294 g.

Q: Does APF-30 print labels?
A: No. It applies pre-printed labels only.

Q: Can it apply barcode labels?
A: Yes, if the barcode label fits the dimensional and material specifications.

Q: Can it apply RFID labels?
A: Potentially, if the RFID label construction and dimensions are compatible. The APF-30 does not encode RFID.

Q: Can it use synthetic labels?
A: Some film, synthetic and specialty labels may not be supported reliably and should be tested first.

Q: What label thickness is recommended?
A: At least 50 μm.

Q: What core size is recommended?
A: At least 25 mm, with approximately 38–51 mm / 1.5–2 inches preferred.

Q: Is APF-30 made in Japan?
A: Yes. TOWA identifies the APF Series as made in Japan.

Contact

For product inquiries and label compatibility verification:

Email: support@neotech.ae

Address: Store 13, Computer Bldg, Al Fahidi, Bur Dubai, Dubai 44245, UAE

Please provide the TOWA APF-30 requirement, quantity, label dimensions, label shape and roll specifications where possible.

Disclaimer

NEOTECH® is operated by NEOLYN TECHNOLOGY LLC in the UAE.

TOWA, APF, APN and associated product names and trademarks belong to their respective owners. NEOTECH® does not claim manufacturer authorization or endorsement unless separately documented.

This page specifically describes the TOWA APF-30.

TOWA specifies the APF-30 for labels approximately 20–30 mm wide and 20–60 mm long, with a 34 mm maximum liner width, 2–3 mm recommended gap and 100 mm maximum roll outside diameter.

Label compatibility also depends on shape, material, thickness, liner, core size and winding.

Specialty film or synthetic labels may require sample testing.

The APF-30 is a manual applicator. It does not print labels or encode RFID tags.

Images may show sample labels or accessories for illustration.

Last Updated: 16 September 2026 (GST, UTC+4)

Language

TOWA APF-30 Handheld Label Applicator | NEOTECH® UAE